Experimental Study of Surface Etching in Synthetic Diamond Microcrystals due to Presence of Cu and Fe at High Pressure
УДК 548.5+549.211
Abstract
In the present work, microcrystals of synthetic diamond extracted from a metal-diamond composite were investigated. A composite based on Cu and Fe was obtained by sintering at a pressure of 4 GPa and a temperature of1300 °C. The experiments were carried out using a split-sphere high-pressure apparatus BARS. The high-pressure cell was made of refractory oxides ZrO2, CaO, and MgO using a tubular graphite heater. In the composite, diamond grains were in close contact with neighboring diamonds, and the metal phase filled the interstices. The study of the diamond crystals demonstrated the appearance of newly formed micromorphological structures on the surfaces in the form of numerous cavities of irregular shape on the faces of octahedron, as well as pyramids on the faces of cube, the morphological elements of which follow the contours of the cube face of the diamond. Thus, the results of the work evidence for the processes of etching of the diamond crystals during the experiments, which is associated with the presence of metallic iron in the composite. This type of etching forms a roughly cavernous surface on the diamond crystals, which can be considered as an additional factor for improving the metal-diamond bond in copper-based composites.
Downloads
Metrics
References
Field E.J. The properties of natural and synthetic diamonds. London, 1992.
Kidalov S.V., Shakhov F.M. Thermal Conductivity of Diamond // Composites, Materials. 2009. V. 2.
Weber L., Tavangar R. Diamond-based Metal Matrix Composites for Thermal Management made by Liquid Metal Infiltration-Potential and Limits // Advanced Materials Research. 2009. V. 59.
Yoshida K., Morigami H. Thermal properties of diamond/ copper composite material // Microelectronics Reliability. 2004. V. 44.
Екимов Е.А., Суетин Н.В., Попович А.Ф., Ральченко В.Г., Громницкая Е.Л., Моденов В.П. Влияние микроструктуры и размера зерна на теплопроводность алмазных композитов, полученных при высоких давлениях // Неорганические материалы. 2008. Т. 44. № 3.
Екимов Е.А., Зотеев А., Боровиков Н.Ф. Спекание наночастиц алмаза в присутствии кобальта // Неорганические материалы. 2009. Т. 45. № 5.
Ekimov E.A., Ralchenko V., Popovich A. Synthesis of superconducting boron-doped diamond compacts with high elastic moduli and thermal stability // Diamond and related materials. 2014. V. 50.
Malinovsky I.Y., Shurin Ya.I., Ran E.N., Godovikov A.A., Kalinin A.A., Doroshev A.M. A New Type of “Split Sphere” Apparatus. DELP International Symposium-Second Japan — USSR Symposium, Misasa, Japan, 1989.
Tomilenko A.A., Chepurov A.I., Sonin V.M., Bul’bak T.A., Zhimulev E.I., Chepurov A.A., Timina T.Yu., Pokhilenko N.P. The synthesis of methane and heavier hydrocarbons in the system graphite-iron-serpentine at 2 and 4 GPa and 1200 °C. High Temperatures-High Pressures. 2015. V. 44. № 6.
Kennedy C.S., Kennedy G.C. The equilibrium boundary between graphite and diamond // J. of Geophysical Res. 1976. V. 81(14).
Tonkov E.Yu., Ponyatovsky E.G. Phase transformations of elements under high pressure // CRC Press. 2004.
Sonin V.M., Chepurov A.I., Fedorov I.I. The action of iron particles at catalyzed hydrogenation of {100} and {110} faces of synthetic diamond // Diamond and Related Materials. 2003. V. 12.
Izvestiya of Altai State University is a golden publisher, as we allow self-archiving, but most importantly we are fully transparent about your rights.
Authors may present and discuss their findings ahead of publication: at biological or scientific conferences, on preprint servers, in public databases, and in blogs, wikis, tweets, and other informal communication channels.
Izvestiya of Altai State University allows authors to deposit manuscripts (currently under review or those for intended submission to Izvestiya of Altai State University) in non-commercial, pre-print servers such as ArXiv.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY 4.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).