The Influence of the Volume Fraction of Ceramic Particles on the Plastic Strain Localization and Fracture of Metal Matrix Composites. Computational Analysis

УДК 539.374:519.6

  • A.V. Zemlianov National Research Tomsk State University (Tomsk, Russia); Institute of Strength Physics and Materials Science SB RAS (Tomsk, Russia) Email: zem.aleks99@mail.ru
  • D.D. Gatiyatullina National Research Tomsk State University (Tomsk, Russia); Institute of Strength Physics and Materials Science SB RAS (Tomsk, Russia) Email: gdiana0510@gmail.com
  • R.R. Balokhonov Institute of Strength Physics and Materials Science SB RAS (Tomsk, Russia) Email: rusy@ispms.ru
DOI_disc_logo https://doi.org/10.14258/izvasu(2022)4-03
Keywords: numerical simulation, metal matrix composites, mechanics of non-homogeneous materials, residual thermal stresses, fracture

Abstract

In this paper, the mechanical behavior of the metal matrix composite under the action of different thermomechanical loading is investigated. The inhomogeneous structure of composites is explicitly considered in the calculations. Isotropic elastoplastic and elastic-brittle constitutive models are used to describe the mechanical response of the aluminum matrix and ceramic particles, respectively. A representative volume of the composite material containing several boron carbide particles located in the microvolume of aluminum alloy 6061T6 is considered. Two structures are created with different volume fractions of ceramic particles. It is found that the strength of the structure with lower volume fraction of particles is higher than the strength of the structure with larger volume fraction. Two types of problems are solved: 1) tension with considering residual stresses, and 2) tension without considering residual stresses. The Duhamel-Neumann relations are used to take into account residual stresses in the calculations. The influence of residual stresses on the fracture of particles in mesovolumes is investigated. Dynamic boundary value problems are solved by the finite element method in the ABAQUS / Explicit software package.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Author Biographies

A.V. Zemlianov, National Research Tomsk State University (Tomsk, Russia); Institute of Strength Physics and Materials Science SB RAS (Tomsk, Russia)

магистрант физико-технического факультета; инженер Лаборатории механики структурно-неоднородных сред

D.D. Gatiyatullina, National Research Tomsk State University (Tomsk, Russia); Institute of Strength Physics and Materials Science SB RAS (Tomsk, Russia)

студентка физико-технического факультета; инженер Лаборатории механики структурно-неоднородных сред

R.R. Balokhonov, Institute of Strength Physics and Materials Science SB RAS (Tomsk, Russia)

доктор физико-математических наук, заведующий Лабораторией механики структурно-неоднородных сред

References

Ravi Chandran K.S., Panda K.B., Sahay S.S. TiBw-Reinforced Ti Composites: Processing, properties, application prospects, and research needs // JOM. 2004. Vol. 56. № 5. DOI: 10.1007/s11837-004-0127-1.

Garg P., Jamwal A., Kumar D., et al. Advance research progresses in aluminium matrix composites: manufacturing & applications // Journal of Materials Research and Technology. 2019. Vol. 8. № 5. DOI: 10.1016/j.jmrt.2019.06.028.

Singh H., Brar G. S., Kumar H., Aggarwal V A review on metal matrix composite for automobile applications // Materials Today: Proceedings. 2021. Vol. 43. Part 1. DOI: 10.1016/j.matpr.2020.11.670.

Ramanathan A., Pradeep K. K., and Rajaraman M. A review on the production of metal matrix composites through stir casting — Furnace design, properties, challenges, and research opportunities // Journal of Manufacturing Processes. 2019. Vol. 42. DOI: 10.1016/j.jmapro.2019.04.017.

Auradi V, Rajesh G.L., and Kori S.A. Processing of B4C Particulate Reinforced 6061Aluminum Matrix Composites by Melt Stirring Involving Two-step Addition // Procedia Materials Science. 2014. Vol. 6. DOI: 10.1016/j.mspro.2014.07.177.

Tang F., Anderson I.E., Biner S.B. Solid state sintering and consolidation of Al powders and Al matrix composites // Journal of Light Metals. 2002. Vol. 2. Iss. 4. DOI: 10.1016/ S1471-5317(03)00004-X.

Fomin V.M., Golyshev A.A., Kosarev V.F., Malikov A.G., Orishich A.M., Filippov A.A. Deposition of Cermet Coatings on the Basis of Ti, Ni, WC, and B4C by Cold Gas Dynamic Spraying with Subsequent Laser Irradiation // Physical Mesomechanics. 2020. Vol. 23. DOI: 10.1134/S1029959920040025.

Dinesh Kumar S., Ravichandran M., Jeevika A., Stalin B., Kailasanathan C., Karthick A. Effect of ZrB2 on microstructural, mechanical and corrosion behaviour of aluminium (AA7178) alloy matrix composite prepared by the stir casting route // Ceramics International. 2021. Vol. 47. Issue 9. DOI: 10.1016/j. ceramint.2021.01.158.

Zhu J., Jiang W, Li G., Guan F., Yu Y., Fan Z. Microstructure and mechanical properties of SiCnp/Al6082 aluminum matrix composites prepared by squeeze casting combined with stir casting // Journal of Materials Processing Technology. 2020. Vol. 283. DOI:10.1016/j.jmatprotec.2020.116699.

Muvvala G., Karmakar D.P., Nath A.K. Online assessment of TiC decomposition in laser cladding of metal matrix composite coating // Materials and Design. 2017. Vol. 121. № 5. DOI: 10.1016/j.matdes.2017.02.061.

Choudhary A., Sadhu A., Sarkar S., Nath A.K., Muvvala G. Laser surface polishing of NiCrSiBC — 60WC ceramic-metal matrix composite deposited by laser directed energy deposition process // Surface and Coatings Technology. 2020. Vol. 404. № 25. DOI: 10.1016/j.surfcoat.2020.126480.

Kadolkar P.B., Watkins T.R., De Hosson J.Th.M., Kooi B.J., Dahotre N.B. State of residual stress in laser-deposited ceramic composite coatings on aluminum alloys // Acta Materialia. 2007. Vol. 55. Iss. 4. DOI: 10.1016/j. actamat.2006.07.049.

Pachaury Y., Shin Y. C. Assessment of sub-surface damage during machining of additively manufactured Fe-TiC metal matrix composites // Journal of Materials Processing Technology. 2019. Vol. 266. DOI: 10.1016/j. jmatprotec.2018.11.001.

Venkatesan K., Ramanujam R., and Kuppan P. Parametric modeling and optimization of laser scanning parameters during laser assisted machining of Inconel 718 // Optics & Laser Technology. 2016. Vol. 78. Part B. PDOI: 10.1016/j. optlastec.2015.09.021.

Zhirong Liao, Ali Abdelhafeez, Haonan Li, Yue Yang, Oriol Gavalda Diaz, Dragos Axinte. State-of-the-art of surface integrity in machining of metal matrix composites // International Journal of Machine Tools and Manufacture. 2019. Vol. 143. DOI: 10.1016/j.ijmachtools.2019.05.006.

Dongfeng Cao, Qingfeng Duan, Shuxin Li, Yucheng Zhong, Haixiao Hu. Effects of thermal residual stresses and thermal-induced geometrically necessary dislocations on size-dependent strengthening of particle-reinforced MMCs // Composite Structures. 2018. Vol. 200. № 15. DOI: 10.1016/j. compstruct.2018.05.129.

Bouafia F., Serier B., and Bachir Bouiadjra B. A. Finite element analysis of the thermal residual stresses of SiC particle reinforced aluminum composite // Computational Materials Science. 2012. Vol. 54. DOI: 10.1016/j.commatsci.2011.10.030.

Muvvala G., Karmakar D.P., Nath A.K. Monitoring and assessment of tungsten carbide wettability in laser cladded metal matrix composite coating using an IR pyrometer // Journal of Alloys and Compounds. 2017. Vol. 714 № 15. DOI: 10.1016/j.jallcom.2017.04.254.

Balokhonov R.R., Kulkov A.S., Zemlyanov A.V, et al. Evolution of Residual Stresses and Fracture in Ther-momechanically Loaded Particle-Reinforced Metal Matrix Composites // Physical Mesomechanics. 2021. Vol. 24. DOI: 10.1134/S1029959921050015.

Balokhonov R.R., Evtushenko E.P., Romanova V.A., et al. Formation of Bulk Tensile Regions in Metal Matrix Composites and Coatings under Uniaxial and Multiaxial Compression // Physical Mesomechanics. 2020. Vol. 23.

Published
2022-09-09
How to Cite
Zemlianov A., Gatiyatullina D., Balokhonov R. The Influence of the Volume Fraction of Ceramic Particles on the Plastic Strain Localization and Fracture of Metal Matrix Composites. Computational Analysis // Izvestiya of Altai State University, 2022, № 4(126). P. 24-28 DOI: 10.14258/izvasu(2022)4-03. URL: http://izvestiya.asu.ru/article/view/%282022%294-03.
Issue
No 4(126) (2022): Izvestiya of Altai State University
Section
Физика

Copyright (c) 2022 Александр Викторович Землянов , Диана Дамировна Гатиятуллина , Руслан Ревович Балохонов

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Izvestiya of Altai State University is a golden publisher, as we allow self-archiving, but most importantly we are fully transparent about your rights.

Authors may present and discuss their findings ahead of publication: at biological or scientific conferences, on preprint servers, in public databases, and in blogs, wikis, tweets, and other informal communication channels.

Izvestiya of Altai State University allows authors to deposit manuscripts (currently under review or those for intended submission to Izvestiya of Altai State University) in non-commercial, pre-print servers such as ArXiv.

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY 4.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).